Imagine the anticipation of starting your sleek 2016 Harley Davidson, only to find it silent when the security system is engaged. Pondering whether the engine will come to life or remain dormant can be a frustrating scenario for any rider.
However, understanding the intricacies of how the security system interacts with the bike's cranking functionality is crucial. Stay tuned to unravel the mystery of whether your Harley will crank when security is engaged and discover the solutions to get you back on the road swiftly.
Key Takeaways
- Disarm security using key fob and PIN for cranking.
- Ensure key fob functionality and correct PIN entry.
- Verify bike is in neutral before attempting to start.
- Follow proper security system deactivation steps for engine cranking.
Overview of Harley Davidson Security System
When engaging the security system on a 2016 Harley Davidson, a red light will blink on the speedometer, preventing the bike from cranking until proper authentication is completed. The security system relies on the presence of the FOB for recognition and prompts the rider to enter a PIN code on the gauge to enable ignition.
Should the FOB be misplaced or fail to be sensed, the owner's manual provides instructions for bypassing the security system. To deactivate the security system, it's imperative to ensure the FOB is functioning correctly and verify the position of the run/stop switch for starter engagement. Additionally, the motorcycle must be in neutral for clutch operation during this process.
Following the outlined procedures in the owner's manual is crucial for the successful deactivation of the security system and allowing the bike to start smoothly.
Understanding Cranking in Security Mode
To allow the 2016 Harley Davidson to crank when the security system is engaged, it's essential to first disarm the security measures put in place. Understanding the process of disarming the security system is crucial for a successful engine ignition:
- Locate the security key fob provided with your Harley Davidson, which is essential for disarming the security system.
- Ensure the key fob is within range of the bike, usually within a few feet, for the system to recognize it.
- Press the designated button on the key fob to deactivate the security system, allowing the bike to crank and start normally.
- Once the security system is disarmed, proceed to start the engine using the standard starting procedure for your Harley Davidson bike.
Troubleshooting Security-Enabled Cranking
If you encounter difficulties with the cranking of your 2016 Harley Davidson while the security system is engaged, troubleshooting security-enabled cranking is crucial.
To start, ensure the key fob battery is functional, as a weak battery can prevent proper communication with the security system.
Next, enter your PIN correctly to disarm the security system before attempting to start the bike. If the engine doesn't turn over, double-check that the security system is fully deactivated by verifying the absence of the blinking red light on the speedometer.
In cases where the bike still doesn't start, inspect the main battery to ensure it has ample charge for cranking.
Properly addressing these steps will help you overcome security-related cranking issues and get your Harley Davidson back on the road swiftly. Remember, attention to detail and system functionality are key to ensuring a smooth start every time.
Maintenance Tips for Security Cranking
For optimal performance of your Harley Davidson's security system during cranking, regular maintenance is paramount. Follow these maintenance tips to ensure your bike starts smoothly:
- Check the Key Fob: Regularly inspect your key fob for any signs of damage or wear. Ensure the battery is functioning correctly to send the signal needed to disarm the security system.
- Verify the PIN Entry: Double-check your PIN entry to make sure it's accurate. An incorrect PIN can prevent the security system from disarming and the bike from starting.
- Ensure Bike in Neutral: Before attempting to start the bike, always confirm it's in neutral. Starting the bike in gear can trigger the security system and prevent cranking.
- Press the Start Button: After disarming the security system using the key fob or PIN, press the start button while the dash lights are on to initiate the cranking process. Remember, proper activation is key to a successful start.
Final Thoughts on Harley Davidson Security
Considering the critical role the security system plays in preventing unauthorized starting, ensuring its proper functionality and maintenance is essential for the smooth operation of your Harley Davidson. To guarantee optimal performance, make sure the main battery is load tested periodically by a digital technician to ensure it can power the alarm system effectively. Additionally, always check that the turn signals aren't flashing, especially the Left turn signal, as this may indicate a drained battery or other electrical issues. Regularly inspecting the security system components and connections can help prevent starting issues and ensure a hassle-free riding experience.
| Maintenance Tips | Security System |
|---|---|
| Load test main battery | Ensure proper functionality |
| Check turn signals | Verify alarm system operation |
| Inspect system components | Prevent unauthorized starting |
| Monitor electrical connections | Avoid starting issues |
Conclusion
In conclusion, when the security system is engaged on a 2016 Harley Davidson, the cranking may be affected by various factors. By following troubleshooting steps and proper maintenance, you can ensure that the bike starts smoothly even with the security measures activated.
Remember to stay vigilant and keep your bike in top condition to avoid any starting issues related to the security system.
