When tackling the removal of the crankshaft position sensor on your 2017 Harley Davidson, think of it as unraveling the heartbeat of your bike.
Initially, you'll need to locate the sensor, but what comes next is where the real precision work begins.
As you start the process of unfastening the sensor, a crucial step awaits that could make all the difference in the outcome.
Stay tuned to discover the pivotal technique that ensures a smooth sensor removal process, guiding you towards a successfully completed task.
Key Takeaways
- Use a 3/16th allen key and screwdriver for sensor removal
- Locate sensor near crankshaft for engine timing control
- Troubleshoot wiring and sensor functionality with a multimeter
- Reassemble securely, ensuring proper alignment and connection
Tools Required for the Task
To effectively remove the crankshaft position sensor on your 2017 Harley Davidson, you'll primarily need a 3/16th allen key as the main tool. This specific size is crucial for fitting into the sensor's mounting bolts securely. Additionally, having a flat-bladed screwdriver on hand is recommended. The screwdriver can provide the necessary leverage to ease the sensor out of its position, especially if it has been tightly secured.
When tackling the removal process, ensure that these tools are readily available. The 3/16th allen key and flat-bladed screwdriver will be your trusted allies in accessing and detaching the crankshaft position sensor on your Road King model. By having these tools at the ready, you can smoothly navigate through the removal procedure with precision and efficiency. With the right tools in hand, you're well-equipped to take on this task confidently and liberate your bike from any sensor-related issues.
Locating the Crankshaft Position Sensor
When locating the Crankshaft Position Sensor on your 2017 Harley Davidson, start by examining the area near the crankshaft itself, typically found on the engine casing or close to the flywheel housing for convenient access.
The sensor is crucial for engine timing and ignition control, making its precise location vital for proper functioning. Common issues related to the sensor include wiring damage, connection issues, or sensor malfunction.
Troubleshooting tips involve checking the sensor's wiring harness, ensuring it's properly connected, and inspecting for any visible damage. Sensor testing can be done using a multimeter to verify if it's sending the correct signals to the engine control unit.
When dealing with the sensor, be cautious not to harm the sensor or its wiring to avoid further complications. Identifying and locating the sensor accurately is the initial step towards successful troubleshooting and potential replacement procedures.
Removing the Sensor From the Harley
Locate the clip securing the crankshaft position sensor underneath your Harley Davidson and loosen it using a 3/16th allen key. Ensure a snug fit to prevent stripping.
Once loosened, gently detach the sensor, using a flat-bladed screwdriver for leverage if necessary. Be cautious not to harm the sensor during removal.
Follow the wire from the sensor to inspect for any debris or blockages that may affect sensor performance. Troubleshooting tip: keep the area clean to prevent contaminants from entering the sensor.
Check for signs of wear or damage on the sensor itself before proceeding to replace it with a new one. Regular sensor maintenance is crucial for optimal sensor performance.
Inspecting and Replacing the Sensor
Inspect the crankshaft position sensor on your 2017 Harley Davidson by examining its mounting position and ensuring proper alignment for accurate readings.
To ensure the sensor is functioning optimally, follow these steps:
- Sensor Troubleshooting, Testing: Check for any visible damage or wear on the sensor and its connector. Use a multimeter to test the sensor's resistance and voltage output to verify its performance.
- Sensor Installation, Calibration: When installing the new sensor, make sure it's securely plugged in and aligned correctly with the crankshaft or flywheel. Proper calibration is essential for accurate readings.
- Sensor Maintenance, Care: Regularly inspect the sensor for debris or oil buildup that could affect its performance. Clean the sensor gently with a cloth and sensor-safe cleaner to maintain its efficiency.
Reassembling the Harley Davidson
To complete the reassembly of your Harley Davidson after inspecting and replacing the crankshaft position sensor, securely attach the sensor back into its designated position. Ensure the sensor is properly aligned and seated to prevent any functionality issues. Double-check the sensor connection to guarantee it is snug and secure. Tighten all clips or bolts holding the sensor to avoid it coming loose during operation. After reassembly, test the bike to confirm the sensor works correctly and the motorcycle functions as expected.
| Sensor Installation Tips | Troubleshooting Common Issues | Sensor Maintenance Tips |
|---|---|---|
| – Align sensor properly | – Check for error codes | – Keep sensor clean |
| – Secure sensor connection | – Ensure proper seating | – Inspect for wear |
| – Tighten clips and bolts | – Verify electrical connection | – Replace if damaged |
Conclusion
In conclusion, replacing the crankshaft position sensor on a 2017 Harley Davidson is a straightforward task that can be completed with basic tools and some careful attention to detail.
By following the outlined steps and ensuring proper installation, you can maintain the performance and reliability of your bike.
Remember to test the sensor after installation and take it for a test ride to confirm everything is in working order.
