When it comes to removing the sear on your Harley Davidson Road King Classic, it's like peeling back the layers of a well-kept secret.
The process may seem intricate, but with the right guidance, it becomes a straightforward task that opens the door to further maintenance possibilities.
Let's uncover the steps to reveal a pristine seat and ensure a smooth ride ahead.
Key Takeaways
- Use essential tools like a 7/16 wrench and Phillips screwdriver for seat removal on Road King Classic.
- Follow steps like removing the right saddlebag and rear seat screw carefully.
- Maintain seat integrity with proper cleaning, inspection, and storage practices.
- Ensure correct reassembly by aligning seat tab, securing bolts, and applying lubricant for future ease.
Tools Required for Removing Sear
To remove the seat on a Harley Davidson Road King Classic, you'll need a 7/16 box/open end combo wrench and a Phillips screwdriver. These tools are vital for a seamless process.
The Road King Classic, like the Road Glide, demands precision and the right equipment for maintenance tasks. Without these tools, the risk of damaging your motorcycle increases.
The 7/16 wrench is specifically suited for the bolts securing the seat, ensuring a secure fit and ease of removal. The Phillips screwdriver, on the other hand, is essential for undoing the rear seat screw, a crucial step in accessing and removing the seat.
Using the correct tools not only simplifies the removal process but also helps maintain the integrity of your Road King Classic. Investing in quality tools is a wise decision for any motorcycle enthusiast looking to keep their Harley Davidson in top condition.
Steps to Remove the Sear
Begin by removing the right saddlebag to access the seat removal process. Once the saddlebag is out of the way, follow these steps to liberate the seat from your Electra Glide Ultra Classic:
- Locate and remove the single screw at the rear of the seat. This is usually found near the back fender.
- Lift the rear of the seat gently while pulling it to the rear to disengage it from the locking mechanism. Feel the sense of freedom as the seat comes off effortlessly.
- Clear the tab that slides under the tank to completely remove the seat. This step requires a bit of finesse but offers a satisfying moment of detachment.
- Store the seat in a safe location where it can rest peacefully, free from the confines of the motorcycle.
- Inspect the area for any loose items before reinstallation, ensuring that everything is in its place for the next ride. Enjoy the newfound openness of your bike as you prepare to ride without constraints.
Tips for Disassembling the Sear
When disassembling the seat of your Harley Davidson Road King Classic, make sure to carefully unbuckle the seat strap from the bag mount. To successfully remove the seat, you will need to locate and remove a single screw situated at the very rear of the seat. Using a 7/16 box/open end combo wrench, loosen this screw, and have a Phillips screwdriver at hand for this step. After undoing the screw, gently lift the rear of the seat while pulling it towards the back. Ensure you clear the tab that slides under the tank for smooth removal. When reinstalling the seat, consider ditching the seat strap and leave the front bag mount bolt slightly loose before tightening. Here's a table summarizing the key steps:
| Tips for Disassembling the Sear |
|---|
| 1. Unbuckle seat strap from bag mount |
| 2. Remove rear seat screw with 7/16 wrench |
| 3. Lift rear of seat, clear tank tab |
| 4. Consider not using seat strap for reinstallation |
| 5. Leave front bag mount bolt slightly loose |
Following these steps will ensure a hassle-free disassembly and reassembly process for your Harley Davidson Road King Classic.
Cleaning and Maintenance of the Sear
After successfully disassembling the seat of your Harley Davidson Road King Classic, it's crucial to properly clean and maintain the leather to ensure its longevity and aesthetic appeal. To keep your Harley Davidson seat in top condition, follow these maintenance tips:
- Use a leather cleaner and conditioner specifically designed for motorcycle seats to preserve the quality of the leather on your Harley Davidson Road King Classic.
- Regularly inspect the seat for any signs of wear, cracks, or fading to address maintenance needs promptly and prevent further damage.
- Avoid harsh chemicals or cleaners that can harm the leather or stitching of your Harley Davidson seat, maintaining its original look.
- Store your bike in a covered area or utilize a protective cover to shield the seat from sun, rain, and extreme weather conditions that can degrade the leather.
- Consider applying a UV protectant spray to safeguard your Harley Davidson seat from fading and cracking caused by sun exposure.
These measures will help you maintain the pristine condition of your Harley Davidson Road King Classic seat for years to come.
Reassembling the Sear on Road King
To reassemble the seat on your Road King Classic, ensure the seat tab is correctly aligned under the tank. Once the tab is in place, gently lower the seat cushion, making sure not to pinch any wires or cables.
Secure the seat by tightening all bolts and screws. Double-check the tightness to prevent any rattling or loosening during your ride. Confirm that the seat is securely positioned before riding to avoid safety risks.
For a smoother installation process in the future, consider applying a light coating of lubricant to the seat mounting points. This will make removing and installing the seat easier and help maintain the longevity of your Road King Classic.
Conclusion
With the right tools and a steady hand, removing the seat on a Harley Davidson Road King Classic is a straightforward task. Just remember to take your time and be cautious to avoid any damage.
It's like navigating the open road on your bike – smooth and steady wins the race. So, saddle up, follow the steps, and enjoy the ride knowing your seat is secure.
