Installing the speedo cable on your 1985 FXRT Harley Davidson might seem like a monumental task, but fear not, it can be done with precision and care. By following the steps outlined and ensuring each component fits snugly into place, you're on your way to a successful installation.
Remember, attention to detail is key when dealing with intricate motorcycle parts like the speedo cable, so proceed with caution and patience.
Stay tuned for the detailed steps ahead to get your speedometer up and running smoothly on your classic Harley.
Key Takeaways
- Use proper tools and confirm cable compatibility for FXRT model.
- Carefully remove old speedo cable, checking for damage.
- Install new cable securely, following correct threading and positioning.
- Test connections and troubleshoot for accurate speedometer function.
Required Tools for Installation
To complete the installation of the speedo cable on your 1985 FXRT Harley Davidson, you'll need a set of wrenches and pliers as the basic tools required for the process. Start by finding the speedometer cable's entry point near the front wheel of your bike. Confirm that the new speedo cable matches the correct length and type specified for your FXRT model.
Once you have the necessary tools and the correct cable, get ready to thread the speedometer cable through the designated route towards the speedometer assembly. Be cautious of any specific routing or mounting requirements outlined by the manufacturer to prevent any damage during installation. Secure the cable firmly in place near the front wheel to prevent any unnecessary movement.
After finishing the installation, test the speedometer's functionality by taking a short ride to verify the accuracy of the readings. Adjust the cable if needed to guarantee smooth operation and precise speed measurements while riding your Harley Davidson.
Removing the Old Speedo Cable
Inspect the speedometer drive unit near the front wheel of your 1985 FXRT Harley Davidson to locate the old speedo cable. Follow these steps to remove the old speedo cable:
| Steps to Remove Old Speedo Cable |
|---|
| 1. Locate the speedometer drive unit. |
| 2. Unscrew the retaining clip or bolt securing the cable. |
| 3. Carefully pull the old speedo cable out of the drive unit. |
| 4. Follow the cable along its route to the speedometer. |
| 5. Disconnect the old speedo cable from the speedometer. |
| 6. Inspect the cable for any damage or wear. |
Installing the New Speedo Cable
When installing the new speedo cable on your 1985 FXRT Harley Davidson, make sure the threaded end is securely attached to the speedo drive unit. To guarantee a successful installation, follow these steps:
- Thread the cable into the drive unit before connecting the speedometer end.
- Verify that the cable can be threaded through the Stock Cable Guide on the front fender.
- Consider removing the front tire for access to the drive unit and wheel truing.
Properly attaching the cable's end to the speedo drive unit is important for accurate speedometer readings and overall functionality.
Connecting the Speedo Cable
Have you verified that the threaded portion of the speedo cable is securely connected to the drive unit on your 1985 FXRT Harley Davidson? Ensuring this connection is crucial for accurate speedometer readings. To properly connect the speedo cable, follow these steps:
| Steps to Connect Speedo Cable | Description |
|---|---|
| 1. Locate Drive Unit | Identify the location for connection. |
| 2. Thread Cable | Securely thread the cable into the drive unit. |
| 3. Check Tightness | Ensure the connection is secure to prevent slippage. |
| 4. Attach Speedometer End | Connect the speedometer end of the cable. |
| 5. Test Connection | Rotate the front tire to test the connection's integrity. |
Testing the Speedometer
To properly verify the functionality of the speedometer on your 1985 FXRT Harley Davidson, make certain that the speedo cable is securely connected to both the speedometer and the wheel sensor. When testing the speedometer, follow these steps:
- Confirm the speedo cable is securely threaded into the speedometer and the drive unit on the wheel.
- Spin the front wheel of the motorcycle and observe if the speedo cable rotates smoothly.
- Verify that the speedometer needle responds correctly to the wheel rotation, indicating accurate speed readings.
If the speedometer doesn't function properly, troubleshooting may be required to identify and resolve any issues with the speedo cable or the speedometer itself. Checking these connections and observing the rotation of the speedo cable will help guarantee that your speedometer provides accurate readings while riding your 1985 FXRT Harley Davidson.
Conclusion
To summarize, installing the speedo cable on your 1985 FXRT Harley Davidson is a straightforward process that requires attention to detail. By following the steps outlined in this guide, you can guarantee that your speedometer functions correctly and accurately.
Remember, a stitch in time saves nine, so take the time to properly install the speedo cable to avoid any issues down the road.
Happy riding!
