Did you know that the rocker arm plays a crucial role in the valve operation of your 2013 Harley Davidson Street Glide, allowing for precise control over the engine's performance?
When it comes to removing the rocker arm, proper technique and attention to detail are essential. By following the correct steps and using the required tools, you can ensure a smooth and successful removal process.
Stay tuned to discover the key tips and tricks for effectively removing the rocker arm on your Harley Davidson Street Glide, ensuring optimal performance and longevity of your bike's engine.
Key Takeaways
- Loosen and remove rocker arm assembly carefully with a 7/16-inch socket.
- Inspect rocker arms for wear, cracks, or damage before considering replacement.
- Position front piston correctly and verify timing during reassembly.
- Use proper tools and follow a systematic approach for efficient rocker arm removal on a 2013 Harley Davidson Street Glide.
Tools Required for Rocker Arm Removal
To efficiently remove the rocker arm on a 2013 Harley Davidson Street Glide, you'll need a 7/16 inch socket for bolt removal. Begin by locating the rocker arm assembly on your motorcycle. Make sure to identify the bolts that secure the rocker arm in place.
Using the 7/16 inch socket, carefully loosen and remove each bolt one at a time. A ratchet wrench can be handy for accessing hard-to-reach bolts during this process. It's crucial to follow a specific pattern when detaching the bolts to ensure proper disassembly.
Additionally, consider the torque specifications provided by the manufacturer for both loosening and re-tightening the rocker arm bolts. Keeping track of the parts and their locations as you remove them will make reassembly much smoother later on.
With the necessary tools and a systematic approach, removing the rocker arm on your Harley Davidson Street Glide with a six-speed transmission can be accomplished efficiently.
Preparation Steps Before Removal
Before proceeding with the removal of the rocker arm on your 2013 Harley Davidson Street Glide, ensure you have removed the old gasket from the rocker box cover and cleaned any remnants with rubbing alcohol for a clean work surface. To prepare adequately for the rocker arm removal, follow these steps:
- Gasket cleaning: Remove the old gasket from the rocker box cover and clean any residues with rubbing alcohol to ensure a smooth work area.
- Compression relief: Prior to rocker arm removal, relieve engine compression by taking out the spark plugs.
- Mini jack usage: Lift the rear of the bike using a mini jack to gain better access to the rocker arm components during the removal process.
- Transmission shifting: Shift the transmission to sixth gear; this will aid in easier engine turning while working on the rocker arm.
- Engine turning facilitation: To facilitate the process, ensure the engine is easy to turn by making necessary adjustments such as shifting the transmission and removing spark plugs.
Removing the Rocker Arm Assembly
When removing the rocker arm assembly on a 2013 Harley Davidson Street Glide, begin by locating and accessing the rocker box cover on the engine. Use a 7/16-inch socket to loosen and remove the bolts securing the cover in a specific pattern, ensuring proper disassembly. Employ a dead blow hammer to gently tap the cover for detachment, revealing the rocker arm assembly beneath. Carefully lift and remove the assembly, ensuring all components are disconnected to prevent damage during extraction.
Rocker Arm Assembly Removal Process:
| Steps | Details |
|---|---|
| Locate Rocker Box Cover | Find and access the cover on the engine. |
| Remove Bolts | Loosen and remove bolts in a specific pattern using a 7/16-inch socket. |
| Detach Cover | Gently tap cover with a dead blow hammer for detachment. |
| Lift Rocker Arm Assembly | Carefully lift and remove the assembly from the engine. |
| Check Components | Inspect for wear or damage before proceeding with maintenance. |
After removing the rocker arm assembly, assess the components for wear or damage to address any maintenance, troubleshooting, or upgrades required for optimal rocker arm performance.
Inspecting and Replacing Rocker Arms
Upon inspecting the rocker arms on your 2013 Harley Davidson Street Glide, carefully evaluate them for signs of wear, damage, or excessive play to ensure optimal engine performance. Regular maintenance and inspection of rocker arms are crucial to prevent potential engine issues and maintain peak motorcycle performance. Here are some key points to consider:
- Check for visible signs of wear on the rocker arms.
- Look for any cracks or damage that may affect their functionality.
- Test for excessive play by gently moving the rocker arms back and forth.
- Ensure the rocker arms are properly lubricated to prevent premature wear.
- If any issues are detected during inspection, consider replacing the rocker arms to avoid potential engine problems.
Reassembling the Rocker Arm Mechanism
To reassemble the rocker arm mechanism on your 2013 Harley Davidson Street Glide, ensure the front piston is positioned at top dead center for proper alignment. Insert a screwdriver into the spark plug hole to verify the timing is correct.
After confirming the piston position, access the rocker arm support bolts by removing the breather assembly and filter. Remember to back out the rocker arm support bolts in a specific pattern to prevent misalignment during reassembly.
Carefully reinstall the push rods in the correct order. Then, tighten all support bolts securely to manufacturer specifications. This step is crucial to maintain proper alignment and ensure the rocker arm mechanism functions correctly.
Double-check the timing and alignment before proceeding. By following these steps meticulously, you guarantee the support bolts are tightened correctly, the timing is accurate, and the rocker arm mechanism is reassembled with precision and care.
Conclusion
As you carefully inspect and replace the rocker arms on your 2013 Harley Davidson Street Glide, remember to pay close attention to the intricate details of the assembly. Every bolt, gasket, and component plays a crucial role in the smooth operation of your bike.
Stay focused, take your time, and ensure everything is in its proper place before completing the reassembly process. The satisfaction of a job well done awaits you as you finish this intricate task.
